All devices

Category: I - Lines

Sets of equipment used for automation of technological processes in series production. Can be equipped with loading, unloading systems, for stacking, interop transport, assembly, etc. Control of the whole line is integrated, control system controls all machining, assembly operations and the flow/movement of items between devices. The line has a common security system, with the fault finding the procedure for errors and failure.

Category: I - Lines

Wood strips are supplied by the operator to the truck of the first milling tenoner. Supply of elements initiates the miller work cycle.

Category: I - Lines

Wood strips are supplied by the operator to the truck of the milling tenoner. Supply of elements initiates the miller work cycle. The stack face is levelled, after which milling of the finger joint outline is carried out.

Category: I - Lines

DFCSB processing line for endless joining is the processing line for the production of structural timber with different cross-sections, which after further processing/machining in the final phase of the process as structural beams. 

Category: I - Lines

The line is designed for automation of cutting the HDF (high-density fibreboard) boards.

Category: I - Lines

The LPEO-560 line serves for the production of two-sided veneered panels with a “sandwich” structure, obtained from waste material, with a length from 600 to 2300 mm.

Category: I - Lines

The LZOTT Loading and Receiving Line of the Belt Frame Saw serves to load logs onto the belt frame saw and to receive products after the log has been sawn.

Category: I - Lines

The LSP surface structuring line serves to structure the surfaces of wood and wood derivative elements for the purpose of achieving a  fashionable effect of rustic wood - aged wood.

Category: I - Lines

W technologiach klejenia oraz uszlachetniania powierzchni drewna oraz tworzyw drewnopochodnych wyrobami ekologicznymi takimi olej czy wosk odnotowuje się w ostatnich latach znacząca dynamikę rozwoju, zarówno w sferze dokonań materiałowych, jak także nowatorskich rozwiązań technicznych. Wychodząc naprzeciw nowym rozwiązaniom firma FAMAD przedstawia w pełni zautomatyzowaną linię służącą do olejowania, woskowania lub nakładania olejowosku LUP-O.

The applier is designed for the one or two sided appliance of glue on wooden strips in the process of door plywood production.

The machine is designed for the one sided coating of wooden elements with glue.

The two-sided four cylinder glue spreader is meant for the two-sided appliance of glue on wooden or wood derivative elements in the production of furniture, boards, and plywood. The glue spreader is designed for work in a veneering line or as a standalone machine.

The DKCB –140 TS one-sided hardener spreader with a conveyor belt is meant for the one-sided spreading of hardener on flat wooden or wood derivative elements during veneering in the process of separate application of glue and hardener. Hardener is dosed to the space between cylinders thanks to a pneumatic membrane pump and is found in the circulation system.

The spreader is designed for the one or two sided appliance of glue on wooden or wood derivative strips.

The DOVD-130 two cylinder glue spreader is designed for the one or two sided appliance of glue on panel surfaces and other flat elements.

The DOVS two cylinder glue spreader is designed for the one or two sided appliance of glue on boards, strips, panels, square-sawn timber and other elements used in the furnishing industry and others. It works using a two cylinder system with individual glue spreading by each cylinder.

The NKP-180 two-sided four-cylinder glue spreader serves for two-sided spreading of polyurethane glue. The cylinder glue spreader can operate as an independent machine or (after disassembly of the front protective frame) as a machine in a process line.

The device is intended for two-sided coating elements and blockboards, and flat elements during veneering.

ANKP automatic machine applying polyurethane adhesive is a device for band-shaped applying the polyurethane adhesive on the board in the process of stacking stack for adhesive bonding.

Urządzenie przeznaczone jest do jedno lub dwustronnego powlekania elementów, płyt stolarskich oraz płaskich elementów przy okleinowaniu. Zasadniczym zespołem urządzenia jest zespół walców ogumowanych. Każdy walec nanosi klej oddzielnie. Na powierzchniach cylindrycznych walców ogumowanych nacięte są rowki w postaci linii śrubowej o skoku i głębokości (zależnie od przeznaczenia).

Jednostronna walcowa nakładarka kleju NKP-130 przeznaczona jest do aplikacji kleju na powierzchnie płaskie. Walcowa nakładarka kleju może pracować jako maszyna samodzielna, lub po zdemontowaniu przedniej ramki zabezpieczającej jako jedna z maszyn w linii technologicznej.

Dwustronna czterowalcowa nakładarka polimeru DCNP-130 jest to specjalistyczne urządzenie przeznaczona jest do dwustronnego powlekania polimerem rulonów blachy. Nakładarka przystosowana jest do pracy w linii i nie może pracować jako maszyna samodzielna. 

Dwustronna walcowa nakładarka kleju NKP-140 przeznaczona jest do aplikacji kleju na powierzchnie płaskie. Walcowa nakładarka kleju może pracować jako maszyna samodzielna.

Dwustronna walcowa nakładarka kleju NKP-280 XL przeznaczona jest do aplikacji kleju na powierzchnie płaskie. Nakładarka kleju może pracować jako maszyna samodzielna.

Automat nakładający klej poliuretanowy ANKP jest to urządzenie do pasmowego nakładania kleju poliuretanowego na deskę w procesie układania stosu do klejenia.

The DABA type varnish glazer is meant for glazing plates with nitrocellulose, polyester, water, and pigmented varnishes. The glazer can be installed in a varnishing-drying line or it can be plugged into a socket.

The DALB-60 type one-headed varnish glazer is meant for glazing flat elements with nitrocellulose, polyurethane, water, and pigmented varnishes.

Brushing mills are designed for the two-sided cleaning of plate elements from dirt and dust.

The brushing-sanding machine is designed for the four sided passing sanding and dusting of the wooden surfaces of sills and window frames.

The brushing-sanding machine is designed for the four sided passing sanding and dusting of wooden elements; for example, after profile milling or veneering.

The brushing-sanding machine is designed for the four sided passing sanding and dusting of wooden elements; for example, after profile milling or veneering. It is equipped with TRANSACTOR work heads with a construction making the quick replacement of individual sanding/polishing segments possible

The DKRC furniture assembly clamp is designed for the assembly of glued furniture elements. The body is welded from steel sections which ensure the machine’s stiffness.

The HSMK hydraulic clamp is a machine that makes final assembly (full clamping) of a firstly tenoned chair frame.

The HSRO hydraulic clamp is a machine that makes possible the mechanical assembly of all rectangular and one-sidedly skewed (special make) frame constructions, especially those of windows and doors of various dimensions, with minimal rearming times.

The OSMF rotating pneumatic press for the assembly of furniture frontage makes it possible to mechanically assemble furniture frontage from MDF boards using peg gluing technology.

The frontage assembly press is designed for the gluing of frontages (wooden elements) on two independent pneumatic assembly tables.

The staircase assembly clamp DSMS-5 is an appliance that makes the mechanical installation of steps in staircases with side surfaces possible, with a minimal exchange of die time.

The HSRD hydraulic press is a machine for pressing glued door frames and other frames of similar dimensions during assembly.

The HSDP hydraulic clamp is designed for gluing boards - mainly floorboards, square-sawn timber and various wooden shapes by thickness. Gluing is done under high pressure from the hydraulic actuators.

The HSKG machine is designed for gluing wooden elements cut according to thickness under high pressure exerted by hydraulic actuators.

The HSKG-Ł hydraulic clamp is designed for gluing wooden arches according to thickness, used mainly in the production of elements of the so-called “gardening variety."

The HSPP hydraulic press is used in the new technology of gluing under high pressure exerted by hydraulic actuators reaching 1,4 MPa (14 kG/cm2).

The hydraulic windmill press is designed for the gluing of wooden elements. The applied constructional solution makes it possible to glue elements according to width, up to the attainment of elements of a "table top" type.

HPPA hydraulic press is used for a layered adhesive bonding of stacks consisting of plates, plywood, etc. 

The DPŁ arc pneumatic press is designed for connecting diagonally milled ends of wooden elements into one whole, being an end product for the making of arched elements.

The DKB pneumatic section press is meant for gluing wooden elements under a specified pressure. The applied constructional solution makes it possible to glue elements according to thickness and width, including the obtainment of elements such as a "table top."

The OPPK pneumatic shelf press is designed for the gluing of the external layer of lamellas into a floor panel.

DPTW device is used to cut defects out (preparation of the raw material for the joining with micro-dovetails) in wooden slats in the areas marked with fluorescent chalk, read out by the luminescent scanner (of the SICK company) and for cutting elements on the desired dimension set on the control panel. The importance of areas of lath to cut out is done manually by selecting persons.

The DFA door frame sill recess miller is a specialized machine designed for milling recesses in the sills of door frames under the angular lock plating in stationary frames and regulated frames.

The DWFO door frame miller and drill is a machine designed for making openings for the installation of hinges in the frame stiles, and also for the recess under the lock plating.

The SGML drill-miller is designed for the complex machining of openings and recesses in wooden and paneled doors. It makes openings for the handle and lock insert as well as shallow and deep recesses for the lock and frontal fastening sheets.

The SGML II drill-miller is designed for the complex machining of openings and recesses in wooden and paneled doors. It makes openings for the handle and lock insert as well as shallow and deep recesses for the lock and frontal fastening sheets.

The DFPS recess milling machine for folding stair side surfaces is a specialized machine for milling recesses in the side surface of folding stairs for dovetail joints with steps.

UWED device is designed for drilling and milling holes for fastening the door lock in elements of the door. To improve performance, working elements are mounted on two independent bodies; it provides simultaneous independent machining of two door components.

ODLP-400 two saw edger is designed for the double-sided formatting of the board in the production process. The device at the same time forms the two edges of the boards so reduces the duration of the entire process.

PWDP straight-through drilling machine for floorboard is a device used to perform blind holes in the floorboard.

Category: XI - Lifts

The DPMA pneumatic assembly table serves as a work station in technological processes, mainly the production of furniture and upholstering. It can also be used for loading and unloading when managing stocks.

Category: XI - Lifts

Designed for the mechanization and automation of various transport and loading/unloading operations as well as for work in technological lines.

Category: XI - Lifts

The DHP hydraulic lift allows for the stepless lifting and lowering of materials in installation locations, loading and working stations with table dimensions approaching those of a EUR pallet. It makes it possible to maintain a constant working level during the loading or unloading of material.

Category: XI - Lifts

The DPNH type lift with a load capacity of 0,3 - 2,5t is a new model among hydraulic scissor lifts manufactured by FAMAD.

Category: XI - Lifts

The DBNK hydraulic lift allows for the stepless lifting and lowering of materials in installation locations, loading and working stations. It makes it possible to maintain a constant working level during the loading or unloading of materials.

Category: XI - Lifts

DPNHT lifts are for the mechanization and automation of various transport and loading-unloading operations in the case of a need for large lifting heights

The automatic WZ-R Loading and Unloading Truck is a device for automation of pallet management processes. It is applied for automation of loading and unloading of process lines as well as in advanced warehouse management.

Parameters of the loading and receiving line of the belt frame saw are adapted to each customer's individual needs.The PEK short element feeder serves for mechanical pushing of wood elements during processing.

All technical parameters: conveyor width, length, height, installed power, roller type, load, etc. according to individual establishment with the client.

Driven PT belt conveyors are designed for the two-way transport of mainly wooden elements: strips, sawn timber, solid and glued square-sawn timber.

PŁLD chain feeder is intended for a single delivery of boards placed in the dispenser.

PKS cross conveyor for planing machine is a device used to automate the process of feeding the elements for the planing machine in the technological process. The device provides continuity of feeding the elements forehead on the forehead.

Przenośnik krzyżowy do strugarki PKDS jest to urządzenie służącze do automatyzacji procesu podawania elemetów do strugarki w procesie technologicznym. Urządzenie zapewnia ciągłość podawania elemetów czoło w czoło. W skład PKDS przenośnika wchodzi przenośnik paskowy PP-1.5m oraz przenośnik  taśmowy PT-2.5m.

Category: XIII - Others

Straightening device for packages - DTPE is a special machine designed for the levelling stack of board elements given then the automatic processing line. 

Cylinder hydrauliczny typu CNOD jest cylindrem nurnikowym jednostronnego działania przeznaczone do ogólnego stosowania w maszynach i urządzeniach.

Cylinder hydrauliczny typu CNOK jest cylindrem nurnikowym jednostronnego działania przeznaczone do ogólnego stosowania w maszynach i urządzeniach.

Category: Plunger

Cylinder hydrauliczny typu CNOK jest cylindrem nurnikowym jednostronnego działania przeznaczone do ogólnego stosowania w maszynach i urządzeniach.

Category: Plunger

Cylinder hydrauliczny typu CNOD jest cylindrem nurnikowym jednostronnego działania przeznaczone do ogólnego stosowania w maszynach i urządzeniach.

Category: Pistons

Cylindry hydrauliczne typu CTO są cylindrami tłokowymi dwustronnego działania z tłoczyskiem jednostronnym przeznaczone do ogólnego stosowania w maszynach i urządzeniach.

Category: Pistons

Cylindry hydrauliczne typu CTO są cylindrami tłokowymi dwustronnego działania z tłoczyskiem jednostronnym przeznaczone do ogólnego stosowania w maszynach i urządzeniach.

Category: Pistons

Cylindry hydrauliczne typu CTO są cylindrami tłokowymi dwustronnego działania z tłoczyskiem jednostronnym przeznaczone do ogólnego stosowania w maszynach i urządzeniach.

Category: Pistons

Cylindry hydrauliczne typu CTO są cylindrami tłokowymi dwustronnego działania z tłoczyskiem jednostronnym przeznaczone do ogólnego stosowania w maszynach i urządzeniach.

Category: Pistons

Cylindry hydrauliczne typu CTO są cylindrami tłokowymi dwustronnego działania z tłoczyskiem jednostronnym przeznaczone do ogólnego stosowania w maszynach i urządzeniach.

Category: Pistons

Cylindry hydrauliczne typu CTO są cylindrami tłokowymi dwustronnego działania z tłoczyskiem jednostronnym przeznaczone do ogólnego stosowania w maszynach i urządzeniach.

Category: Pistons

Cylindry hydrauliczne typu CTO są cylindrami tłokowymi dwustronnego działania z tłoczyskiem jednostronnym przeznaczone do ogólnego stosowania w maszynach i urządzeniach.

Category: Pistons

Cylindry hydrauliczne typu CTO są cylindrami tłokowymi dwustronnego działania z tłoczyskiem jednostronnym przeznaczone do ogólnego stosowania w maszynach i urządzeniach.