The brushing-sanding machine is designed for the four sided passing sanding and dusting of the wooden surfaces of sills and window frames. The machine has individual drives for brushes. The feed mechanism has a separate drive. Dust is removed by exhaust fans to an individual extractor or to the central extraction grid. The brushing – sanding machine has a regulated rate of advance for brushed elements in the range of 5-20 m/min. Also possible is a reverse work variant. The rotational brush speed is regulated in the range of 300 to 1000 rpm. Adjusting working brushes and the height of brushed elements is done by hand operation. The construction of work heads makes the quick replacement of individual cleaning segments possible.
| TECHNICAL AND OPERATIONAL DATA: | ||
| Working width | mm | 200 |
| Minimal element length | mm | 600 |
| Maximum element height | mm | 150 |
| Rate of advance (regulated) | m/min | 5-20 |
| Brush diameter | mm | 280 |
| Advancing roller and pressing roller diameter | mm | 100 |
| Brushing machine rotational speed (regulated) | rpm | 300-1000 |
| Machine working height | mm | 900 |
| Installed power (total) - Brush drive - Advance power feed |
kW | 5,15 4x1,1 0,75 |
| Working voltage | V AC | 3/N/PE, 400V 50Hz |
| Control voltage | V DC | 24 |
| Appliance mass | kg | 850 |