PWDP straight-through drilling machine for floorboard is a device used to perform blind holes in the floorboard.
The device is constructed from two steel bodies, lower and upper, which have been combined/bonded to each other with bolts. The working unit of the device is three special boring heads. Each head is equipped with ten spindles. Working tools are put in the rotary movement by three electric motors. The vertical to-and-fro motion of drilling heads is executed by using the pneumatic actuator. Trolley driving stability of spindles provides the linear guides.
The floorboard is initially placed by the operator on the input conveyor and then based. Drilling machine moves the machined floorboard automatically through the drilling zone, making a to-and-fro motion in the horizontal plane, which is initiated by the pneumatic actuator. During the drilling and also travelling, the floorboard is positioned through a system of pneumatic clamps and grips to ensure a certain conducting and mounting, what affects the proper execution of the duty cycle.
Pictorial view of straight-through drilling machine for floorboard
TECHNICAL-OPERATIONAL DATA: | ||
Number of heads | pcs | 3 |
Number of spindles | pcs | 3 x 10 |
The diameter of the opening | mm | 24 |
Depth of the opening | mm | 13 |
Hole spacing | mm | 32 |
Element thickness max | mm | 32 |
Working width max | mm | 350 |
Length min/max | mm | 1000/6000 |
Working level | mm | 900 |
Working speed of tools | obr/min | 2800 +/- 25% |
Installed power | kW | 3 x 3 |
Operating voltage | V AC | 3x400/50Hz |
Control voltage | V DC | 24 |
The air pressure in the installation/system | MPa | 0,6 |
Length / width / height | mm | 750 / 1677 / 6720 |
Weight of the unit | kg | 500 |