The staircase assembly clamp DSMS-5 is an appliance that makes the mechanical installation of steps in staircases with side surfaces possible, with a minimal exchange of die time.
The machine’s supporting structure is a steel body built from specially shaped sheets. After welding, the body has a worked surface that serves as a base for installation of subassemblies of the clamp. The steps of the installed staircase are pushed in by a set of drawers moved by the pusher rollers. Pusher movement is made possible by a combination of a cylindrical gear and a trapezoidal screw. All pushers are mechanically synchronized; hence all drawers are also synchronized. The appliance is equipped with a slidable base making it possible to install steps in varying distances from the beginning of the side surface. A PLC microprocessor controller operates the clamp’s work. The appliance is equipped with a frequency converter making it possible to regulate the rotational speed of the driving motor and along with it, the clamping speed. A pneumatic system, enabling the regulation of clamping power, is equipped with sensors making work impossible should the clamping be incorrect.
Technical and Operational Data: | ||
Scale | mm | 250 |
Step inclination | deg. | 20 |
Maximum amount of installed steps | qt. | 5 |
Amount of pneumatic actuators: - horizontal clamp - vertical clamp |
qt. | 3+3 2 |
Noise level | dB | 83 |
Installed power | kW | 1,5 |
Working voltage | V | 3/N/PE, 400V 50Hz |
Control voltage | V | 24 |
Appliance mass | kg | 400 |